====Quick Info on Braven BRV-X Speakers====
===Pair a device===
  - Turn BRV-X on (hold power 2-3 seconds, release, hear drone)
  - Activate Bluetooth on your device
  - Press/hold Play button on Braven, hear pairing call
  - On your device, select BRAVEN BRV-X from list.  Passcode if needed is 0000

===Buttons===
|+|Volume Up. Press/hold for skip track|
|-|Volume Down. Press/hold for skip back|
|01|Power, hold 2-3 seconds, release, hear drone for on; similar for off|
|>|Pairing / Answer-end call / Pause-Resume music|

===Pair two Bravens together for stereo - "True Wireless"===
  - On your device, disconnect all Bluetooth connections
  - On your device, remove any Braven Bluetooth connections
  - Press & hold Battery Check button on both Braven speakers for 5 seconds till you hear a sonar sound from both
  - Hear a second beep w/in 30 secs, means True Wireless Connection between the 2 speakers
  - Follow instrux above to pair ONE of the Bravens w/your device

  * When you turn off one Braven the other will also turn off
  * To restart, press power on both Bravens w/in 5 seconds. They'll reconnect and you'll hear 2 beeps

Note, you can only have ONE active Bluetooth connection to your device at the same time, otherwise audio will distort.\\
To correct: power down all other Bluetooth devices in range of my device, turn Bluetooth off then on, on your device.

To break the True Wireless connection, press/hold battery check button till connection stops.

For troubleshooting and tutorial videos: [[http://www.braven.com/TrueWireless]]