=====Orbit 56544 PROGRAMMING THE TIMER=====
===SET CLOCK AND DAY===

  - Turn dial to SET CLOCK.
  - Using the +/- buttons, set the time of day, including AM and PM. Timer advances faster if button is held down.
  - Press the ARROW button to set current day.
  - Press the +/- buttons to move between and select the current day of the week. Press the ARROW button to toggle back to the time of day.
  - Turn dial to save changes

===WATERING SCHEDULES AND START TIMES===
This timer features three customizable watering
schedules [A], [B], [C]. A watering schedule may
include start times for Station 1, Station 2, or both
Station 1 and Station 2. A watering start time is
the time of day the timer will begin to water all
programmed stations; one after another.

NOTE: Only watering schedule [A] is required. Advanced
Users may use watering schedules [B] and [C] for
additional watering.

  - Turn dial to START TIME.
  - Watering schedule [A] is automatically selected and the time selector will be blinking.
  - Using the + / - buttons, set the time you want all watering to begin, including AM and PM. Timer advances faster if button is held down. A box is placed around watering schedule [A] noting a start time has been added.
  - Both Station 1 and Station 2 are automatically selected (noted by boxes around them) when a start time is added. Both Station 1 and Station 2 will water, one after the other, beginning at your selected start time. To remove a station from watering schedule [A] press the STATION button to cycle through and select Station 1 or Station 2. Press the - button to toggle the station off (removing the box). Press the + button to toggle the station on (adding the box).
  - Advanced Users - To program watering schedules [B] or [C] press the ARROW button to move through a select {B] or [C]. Selected schedule will be blinking. Repeat steps 3-5 to program additional watering schedules. Use watering schedules [B] and [C] if you need additional watering schedules.
  - Turn dial to save changes and move to the next step.

===HOW LONG===

  - Turn dial to HOW LONG.
  - Station 1 and the time selector will be blinking.
  - Use +/- buttons to add a 1 to 360 minute watering duration. Timer advances faster if button is held down. A box is placed around Station 1.
  - To select Station 2 press the STATION button. Station 2 and the time selector will be blinking.
  - Use +/- buttons to add a 1 to 360 minute watering duration. Timer advances faster if button is held down. A box is placed around Station 2.
  - Turn dial to save changes and move to the next step.
NOTE: To start over press CLEAR.\\ 
NOTE: To move between stations press the STATION button

===HOW OFTEN===
  - Turn dial to HOW OFTEN.
  - Watering schedule [A] will be blinking.
  - There are two ways to set your watering frequency for Watering Schedule [A]; Days of the Week or Interval. Only one option may be selected for Watering Schedule [A].
     * Option 1- **Days of the Week** -- Select specific days you water to water:
       * Press + or - button to move the cursor down to the Days of the Week.
       * Use the ARROW button to move to the desired day (S, M, T, W, T, F, S). The selected day of the week will be blinking.
       * Press the + button to toggle the Day of the Week on (a box is placed on the day).\\ Press the - button to toggle the Day of the Week off (the box is removed from the day).
       * Repeat to select any combination of days.
   * Option 2- **Interval** -- Select an interval period you want to water:
       * Press + or - button to move the cursor down to the Interval selections.
       * Use the ARROW button to move to INT. The interval [INT] selection will be blinking.
       * Press the + button to increase the interval.\\ Press the - button to decrease the interval.\\ You may choose to interval water every 1 hour, 2 hours, 4 hours, 6 hours, 12 hours, or 1 to 7 days.
Advanced Users - To program Watering Schedules [B] or [C] press the ARROW button to move through and select [B] or [C]. Selected schedule will be blinking. Repeat steps to program watering frequency for additional Watering Schedules [B] and [C].  

Turn dial to save changes and to complete programming.

NOTE: To start over press CLEAR.

CONGRATULATIONS!\\ 
Your timer is now programmed. Turn your dial to
AUTO to allow your timer to water according to
programmed time, station, duration, and frequency.

===ADDITIONAL FEATURES===
===RAIN DELAY===
Rain delay allows you to postpone watering for a set
period of time. To access the rain delay, follow the
steps below.
  - With the dial on AUTO, press the button.
  - Using the +/- buttons select a delay of 1 to 7 days.
  - Screen will flash between clock and hours remaining before programmed cycle resumes.
  - To remove rain delay, turn dial to OFF and then back to AUTO.

===MANUAL/HAND WATERING===

This feature allows you to manual water without interrupting your set schedule.
 
There are two ways to manual water: all stations as programmed or selected stations.
==To manual water all stations as programmed:==
  - With the dial on AUTO, press the MANUAL button.
  - "ALL" will be displayed and the timer will water all stations as programmed.
==To manual water specific stations or durations:==
  - With the dial on AUTO, press the MANUAL button.
  - Press the STATION button to select desired station.
  - Using the +/- buttons, select watering duration from 1 to 360 minutes.

  * Screen will flash between clock and time remaining before automatic programming resumes.
  * To stop manual watering, turn the dial to OFF.
  * Turn the dial back to AUTO to resume your programmed watering schedule

NOTE: There may be a slight delay between the time the
manual button is pressed and when watering begins.