=====Setting Digital Clocks=====
I have several digital clocks, here is how to set or change the time and parameters of each.

====LED Digital Clock, DS-6628====
//Currently in smi livingroom//

===Features===
  * Two display modes: (1) Display time only, (2) Display time, date, and temperature in a cycle
  * Five brightness settings
  * Two alarms
  * Voice controlled wakeup
  * USB power with 3 AAA battery backup

===General (Time) Settings===
Start when showing time.
|tap S|set 12h/24h mode|+/-|
|tap S|set the HOUR    |+/-|
|tap S|set the MINUTE  |+/-|
|tap S|set the YEAR    |+/-|
|tap S|set the MONTH   |+/-|
|tap S|set the DAY     |+/-|
|tap S|switch night mode|+/-|
|tap S|exit setting mode|

__Display mode setting__: long press '+' to switch display mode (1) time only, (2) cycle through time, date, temp\\ 
__Temperature unit setting__: long press '-' for F or C\\ 
__Brightness adjustment__: short press SNOOZE, cycling through brightness 1-5.\\ 
__Night Mode__: display switches to low brightness mode 22:00 - 06:00\\ 
__Don't disturb mode__: long press SNOOZE. Turns off display, turns off voice wake-up (voice wake-up when in battery-only mode). Press a key to exit.\\ 
__Long press__: is press-and-hold for 3 seconds

===Alarm Settings===
Start when showing time.\\ 
tap clock button:displays alarms (1) or (2) (switch between them)
  * Press +/- to set alarm on/off
  * Press S again to set alarm of the corresponding group
  * Tap +/- to set hour
  * Tap S, tap +/- to set minutes
  * Tap S, tap +/- to set frequency ('1-5' Mon-Fri, '1-6' Mon-Sat, '7' everyday)
  * Tap S, exit setting
When alarm sounds, tap any button to start snooze; long press SNOOZE to turn off alarm


----

====Sharp====

===Setting the time===
Press and hold TIME button and then while keeping it pressed:
  * Tap HOUR button to advance the hour. PM indicator will light when in PM times.
  * Tap MIN button to advance the minute.
  * Release TIME button when correct time is showing

===Setting the Alarm===
  * Follow procedure for setting time, while holding ALARM button.
  * To use alarm, slide ALARM ON/OFF button to ON or OFF.  Alarm indicator dot is visible when alarm is ON.
  * When alarm sounds, press SNOOZE to stop alarm for 9 minutes.

===Battery Backup===
Uses 2 AAA batteries.
When power is out, ALARM and TIME settings are retained; display is off; and alarm will sound if set.