This page last changed 2023.10.31 11:58 [Accessed 1 time today, 3 times yesterday, and 1212 total times]
Zoom Handy Recorder H1
Setting Date & Time
-  While pressing the red record button, turn the power on. 1)
-  Use the - «and- »buttons to set the month.
 
-  Press - >/||to move to day.
 
-  Repeat preceding 2 steps to set values for day, year, and time. 
-  Press red record button to return to the previous item. 
-  After setting the last item, press - >/||to finish.
 
 
If a microSD card that is not properly formatted is inserted into the unit, the screen shows ForMAt PrESS
-  Press the red record button to format the card. 
-  Home screen appears after the card is formatted. 
You can also get to this screen and reformat a MicroSD card by pressing the trash button while turning the power on.
 
Turn device on/off
Slide the power switch down for about 1 second to turn device on or off.
 
Change bitrate for recording
Select MP3 or WAV format (switch in back. I use MP3.)
Use » or « to select bitrate.  Then press red button.
Bit rate I'll use for voice: 192
Bit rate I'll use when recording music: 320
 
Playing back a recording
-  Press ">/||" to play the last recorded file 
-  Press « » during playback to select file 
-  Press >/|| to pause/resume 
-  Press red button to return to home screen 
 
Delete recorded audio files
-  Press trashcan button during playback of file you want to delete 
-  Press red button to confirm; press >/||, «, » to cancel deletion 
 
To use as micro card reader
-  Power off 
-  Connect to WinPC or Mac using USB cable 
-  Power on - 
-  To use as MicroSD card reader, press red button while "CArd" is displayed 
-  To use as Audio interface, press red button while "AUdIo" is displayed 
-  If you do neither, MicroSD card reader is selected