Differences

This shows you the differences between two versions of the page.

--- boltune_wireless_stereo_earphones [2021.07.22 20:28] – created Steve Isenberg
+++ boltune_wireless_stereo_earphones [2021.12.22 10:51] (current) – external edit 127.0.0.1
@@ Line 1: / Line 1: @@
 ====Boltune Wireless Stereo Earphones BT-BH001====
-This info from [[https://manualzz.com/doc/54512487/boltune-bt-bh001-earbud-headphone-user-guide]]
+//This info from// [[https://manualzz.com/doc/54512487/boltune-bt-bh001-earbud-headphone-user-guide]]
-+ Volume + / Next
+{{wiki:boltunepix.png??400|Earphone diagram}}
-Δ Multifunction
- LED indicator / Microphone
+|1|+ |Volume + / Next|
-- Volume - / Previous
+|2|Δ |Multifunction|
+|3|  |LED indicator / Microphone|
+|4|- |Volume - / Previous|
 ===Charging===
@@ Line 11: / Line 13: @@
 ===Pairing===
-  - Place earphones and Bluetooth device within 3 feet of each otehr
+  - Place earphones and Bluetooth device within 3 feet of each other
   - Press and hold Multifunction Δ until LED flashes red and blue alternately: Earphones are in pairing mode.
   - Activate Bluetooth on iPhone/iPad, search for nearby. Find ”Boltune BTBH001” in search results, tap to connect.
   - Once connected, blue LED will flash.
-If earphones cannot pair with your Bluetooth device, press and hold the Multifunction Δ button when earphones are off for 10 seconds until LED indicator flashes purple twice.  This clears pairing history.  Then follow instructions above.
+//If earphones cannot pair with your Bluetooth device, press and hold the Multifunction Δ button when earphones are off for 10 seconds until LED indicator flashes purple twice (reset to factory settings).  This clears pairing history.  Then follow instructions above.//
 ===Operation and Functions===
 |Power On|Press and hold Multifunction Δ for 1 second|